Graded Card Retail Display

Define the cabinet purchase: graded card retail display

This guide addresses a fixture buying decision involving encapsulated cards and grading labels. Record whether you need one unit, a department replacement or a coordinated combination. Separate the new supply from retained furniture and equipment supplied by others. The keyword identifies the topic; the cabinet quantity, working dimensions and included options identify the actual order. Measure the holder as it will be displayed, including any sleeve or outer protection. Internal clearance must account for the retaining edge and the movement used to insert and remove the card, not just its resting position. This buying review specifically addresses internal dimensions for graded card displays. Measure the holder as it will be displayed, including any sleeve or outer protection. Internal clearance must account for the retaining edge and the movement used to insert and remove the card, not just its resting position.

• Measured merchandise or equipment dimensions
• Usable space and the required access route
• Cabinet quantity and configuration options
• Drawing, sample and quotation reference

Start with the actual requirement

Measure the holder as it will be displayed, including any sleeve or outer protection. Internal clearance must account for the retaining edge and the movement used to insert and remove the card, not just its resting position.

Primary references: PSA: holder and submission FAQs ↗ · Ultra PRO: trading-card toploaders ↗

Create a review record

Use the same merchandise and conditions throughout the review. Keep each measurement or decision linked to the specific fixture and drawing revision. Holder width, height and thickness — Record the actual value, condition or selected option. Identify any item that still needs confirmation. Clear row width and depth — Record the actual value, condition or selected option. Identify any item that still needs confirmation. Distance above the retaining edge — Record the actual value, condition or selected option. Identify any item that still needs confirmation. Insertion and removal clearance — Record the actual value, condition or selected option. Identify any item that still needs confirmation..

• Measured merchandise or equipment dimensions

Work through the review

Start with the widest and thickest formats, then test a representative mixed row. Review the sample with the cabinet door in its normal operating position. Mark any position where the label becomes obscured or a holder cannot be removed independently.

Interpret the result correctly

Do not describe a cabinet as universally compatible because one grading-company holder fits. Record the actual samples and the layout revision.

Bring the record into your quotation

Send the completed measurements, annotated photographs and configuration choices with your fixture request. Distinguish measured dimensions from estimates, and ask for unresolved points to be identified in the quotation or drawing review rather than assumed. Identify the fixture or combination being considered.; Include the actual merchandise formats and intended quantity.; Keep samples, photos and drawing revisions together for approval..

Catch this mismatch before ordering

A row count can overstate capacity when labels are hidden or fingers cannot reach the holder. Request the drawing or operating demonstration that resolves the mismatch. If the required evidence is unavailable, leave the item open in the specification instead of treating a picture or product name as confirmation.

Turn the selection into a quotation brief

Reference the selected graded card retail display direction and number the cabinet lines separately. State the quantity, external and clear dimensions, merchandise assumptions, shelves, access, locks, lighting and reserve-storage requirements. Identify which options are included and which need separate approval. Add the destination, package constraints and assembly responsibilities; use the same approved revision when comparing or repeating the order.

Record capacity as an arrangement with assumptions

For a simple uniform row: holders per row = floor((clear usable width + gap) / (holder width in the display orientation + gap)). Multiply by the actual usable row count. State the holder or box dimensions, sleeve, orientation, gap, retaining lip and label visibility. Mark the result as an estimate and allow for retrieval and obstructions. This method does not cover arbitrary curves, stacked inventory or complex dividers, and it does not establish drawer loading, shelf strength or cabinet stability.

Apply the company process to this cabinet order

Use the linked company guide to document the selected cabinet scope and the next approval. Keep the measured requirements, current drawings, sample references and order responsibilities consistent. Shared manufacturing principles support the purchase, while the actual dimensions, options and commercial terms remain specific to the confirmed configuration.

Primary references: BENSON Card Store Visual Merchandising ↗

• Measured merchandise or equipment dimensions
• Usable space and the required access route
• Cabinet quantity and configuration options
• Drawing, sample and quotation reference

BENSON cabinet configuration: dimensions and fit

For graded card retail display, prepare your BENSON configuration around the actual merchandise, available space and cabinet quantity. An external cabinet size does not tell you whether a protected card fits.

Primary references: BENSON cabinet dimensions and configuration library ↗

Apply the configuration to your purchase

Develop the graded card retail display schedule using your holder or package dimensions. Record cabinet quantity, clear shelf space, door access, lighting, locks, storage and destination. The wall-mounted sample has a 6 in external depth, while two reference counter shelves are 10 and 12 in deep. These are three different dimensions, not alternative holder clearances.

Record the agreed BENSON configuration

Keep the graded card retail display cabinet reference, drawing revision, dimensions, selected options and delivery requirements together. Record the approved shelf arrangement, holder layout and access clearances so the same configuration can be identified for installation and future orders.