Card Shop Display Case

Define the cabinet purchase: card shop display case

This guide addresses a fixture buying decision involving singles, top loaders and graded holders in a glass counter. Record whether you need one unit, a department replacement or a coordinated combination. Separate the new supply from retained furniture and equipment supplied by others. The keyword identifies the topic; the cabinet quantity, working dimensions and included options identify the actual order. Choose the door arrangement around available access space and daily handling. Sliding panels and hinged doors have different opening paths, and both need sufficient clearance for staff to retrieve the merchandise.

• Measured merchandise or equipment dimensions
• Usable space and the required access route
• Cabinet quantity and configuration options
• Drawing, sample and quotation reference

Record the merchandise and usable dimensions

Record the clear display rectangle and the separate working surface. Include frame thickness, door travel, shelf edges and any cable or lighting intrusion. Choose the door arrangement around available access space and daily handling. Sliding panels and hinged doors have different opening paths, and both need sufficient clearance for staff to retrieve the merchandise.

Primary references: Ultra PRO: trading-card toploaders ↗

Choose against one merchandise set

Use the same holder or package sample, quantity and available footprint for each configuration. Record which display and storage requirements each candidate actually resolves. Compare glass-side and solid-side arrangements from the customer position. A wider exterior does not necessarily provide more usable display area.

• Measured merchandise or equipment dimensions

Test access with stock and adjacent units present

Check rear access while another person is viewing the counter. Provide space to withdraw a tray, handle the card and close the cabinet without entering the checkout position. Include the opening, handling and return movements in the review. Record any space that must remain clear outside the nominal cabinet footprint.

Compare configuration, quantity and included scope

Compare glass-side and solid-side arrangements from the customer position. A wider exterior does not necessarily provide more usable display area. List the alternative configuration and the requirement it changes. Keep fixed requirements identical, including the merchandise set, quantity, finish basis and delivery destination, so a lower quote can be assessed against the same purchase.

Prepare a representative fit and operation review

Draw the door in its fully open position on the measured counter plan. Try removing the largest intended tray or holder from each part of the cabinet. Check whether a queue, chair, adjacent drawer or staff member would occupy the same space. Check rear access while another person is viewing the counter. Provide space to withdraw a tray, handle the card and close the cabinet without entering the checkout position. Keep the sample or measurement reference, drawing revision and unresolved items together. A visual reference alone is not a production approval.

Catch this mismatch before ordering

A closed-door photograph cannot show whether a tray can actually be removed behind the counter. Request the drawing or operating demonstration that resolves the mismatch. If the required evidence is unavailable, leave the item open in the specification instead of treating a picture or product name as confirmation.

Turn the selection into a quotation brief

Reference the selected card shop display case direction and number the cabinet lines separately. State the quantity, external and clear dimensions, merchandise assumptions, shelves, access, locks, lighting and reserve-storage requirements. Identify which options are included and which need separate approval. Add the destination, package constraints and assembly responsibilities; use the same approved revision when comparing or repeating the order.

Record capacity as an arrangement with assumptions

For a simple uniform row: holders per row = floor((clear usable width + gap) / (holder width in the display orientation + gap)). Multiply by the actual usable row count. State the holder or box dimensions, sleeve, orientation, gap, retaining lip and label visibility. Mark the result as an estimate and allow for retrieval and obstructions. This method does not cover arbitrary curves, stacked inventory or complex dividers, and it does not establish drawer loading, shelf strength or cabinet stability.

Apply the company process to this cabinet order

Use the linked company guide to document the selected cabinet scope and the next approval. Keep the measured requirements, current drawings, sample references and order responsibilities consistent. Shared manufacturing principles support the purchase, while the actual dimensions, options and commercial terms remain specific to the confirmed configuration.

Primary references: BENSON Card Store Visual Merchandising ↗

• Measured merchandise or equipment dimensions
• Usable space and the required access route
• Cabinet quantity and configuration options
• Drawing, sample and quotation reference

BENSON cabinet configuration: dimensions and fit

For card shop display case, prepare your BENSON configuration around the actual merchandise, available space and cabinet quantity. Record the clear display rectangle and the separate working surface. Include frame thickness, door travel, shelf edges and any cable or lighting intrusion.

Primary references: BENSON cabinet dimensions and configuration library ↗

Apply the configuration to your purchase

Develop the card shop display case schedule using your holder or package dimensions. Record cabinet quantity, clear shelf space, door access, lighting, locks, storage and destination. Compare glass-side and solid-side arrangements from the customer position. A wider exterior does not necessarily provide more usable display area.

Record the agreed BENSON configuration

Keep the card shop display case cabinet reference, drawing revision, dimensions, selected options and delivery requirements together. Record the approved shelf arrangement, holder layout and access clearances so the same configuration can be identified for installation and future orders.